Raspberry Pi, Arduino, Galileo etc

Links, manuals and utilities

hallon 150px Linux logo 150px
Firewall

Update:
February 03, 2024

Go2Google

OpenWRT firewall with Raspberry Pi

Installing OpenWRT on a Raspberry Pi

König USB2.0 Ethernet adapter is supported in Raspian

/etc/network/interfaces setup with two ethernet LANs.
on IP 192.168.0.207 and IP 192.168.0.211.
The ethernet LANs are not hotplug, but the WLAN on
IP 192.168.0.208 is hot plugable.
---------------------------------------------------

auto lo
iface lo inet loopback
iface eth0 inet static
address 192.168.0.207
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1

iface eth1 inet static
address 192.168.0.211
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1

allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet static
address 192.168.0.208
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255

Raspberry   OPsystem   Tips   Hardware   Projects   Magpi   Arduino   Linux Mint